Guangzhou Jiupai Information Technology Co., Ltd.
Add to Cart
SonoScape E2 E3 E1 Exp X1 X3 X5 KL4S2P31B 14.4V 6.2Ah Ultrasound Compatible Battery
►Brief Description
Battery Instructions:
1. When you get the battery, try to calibrate the new battery. Charge the new battery for 6-12 hours first, then discharge it to 5-10%. Repeat this 2-3 times to fully activate the lithium ion and reach its maximum capacity.
2. If the battery is discharged to 5% during normal use, you should shut down the device to charge it. Discharging the battery to 0% is strictly prohibited, as it will damage the battery and cause it to deteriorate faster.
3. Batteries that will not be used for a long time should be charged to over 70% and stored within 3 months.
4. Do not use the battery in an environment that is too high or too low in temperature.
5. Do not artificially compress, disassemble, drop, heat or short the battery.
6. Use dedicated equipment for charging.
7. If the monitor cannot recognize the battery, it may be due to poor contact between the battery connector and the computer socket. In this case, you should check whether the copper plate of the battery connector is exposed.
8. If the battery cannot be charged normally, it is not necessarily a battery failure. The motherboard, power adapter, system, ambient temperature, etc. may affect the normal operation of the battery.
►Specification
| Brand name | SonoScape |
| Product name | Battery |
| MOQ | 1 Piece |
| Model | KL4S2P31B |
| Payment Method | T/T ,Paypal ,Western Union |
| Volatge | 14.4V |
| Capacitance | 6.2Ah |
| Use for | E2 E3 E1 Exp X1 X3 X5 Machine |
| Delivery Method | DHL ,Fedex ,UPS |
| Payment Terms | Full Before Shippment |
| Stock Situation | Stock available |
| Packing | Carton |
| Method of Transport | Expressage |
| Product Characteristic | Functional,Durable in use |
| Delivery | 3-5 Working Days |
| Net Weight | 0.5Kg |
►Battery startup procedure:
When the device charges the battery for the first time, the device will stop charging the battery when the battery is half charged (sometimes more, sometimes less) due to different voltages and unstable currents. In this case, don't worry, just remove the battery from the device, re-install it and charge it. A new battery may need to be charged several times when it is charged for the first time. Don't worry, this is normal.
►Notes
Actual battery life may vary due to:
• Ambient temperature
• Load changes (e.g. frequent bolus dosing).
The best service life of the battery pack is only achieved if it is regularly and completely discharged. The built-in maintenance mode is used for this battery maintenance. This function should be enabled once a month. In addition:
• Charging a partially discharged battery multiple times may result in a loss of capacity.
• Under normal temperature conditions, the battery can be charged and discharged for approximately 2 hours. If it is charged and discharged more than 500 times, the life will be shortened.
• If the pump is not connected to the mains power, the battery will discharge slowly. This can happen even if the pump is not running.
• Battery life is only valid when the pump is running
A fully charged battery can be used continuously at room temperature.
If you are interested in the SonoScape E2 E3 E1 Exp X1 X3 X5 KL4S2P31B 14.4V 6.2Ah Ultrasound Compatible Battery,please feel free to contact us.